GeomembranesTopHDPE smooth geomembrane
The core seepage barrier: HDPE resin with 2–3 % carbon black, UV stabilisers and antioxidants. Resists acids, alkalis, brines and hydrocarbons.

HDPE and LLDPE geomembranes, geotextiles, GCL, geogrids and drainage for tailings dams, drilling pits, landfills and ponds. Manufactured to GRI‑GM13, contracted through a Kazakh company in KZT with VAT, delivered to site.
Not stock reselling: material is produced to your project parameters, while contracts and paperwork stay in Kazakhstan.
Thickness, roll width and length, colour, smooth or textured — exactly per the designer's specification.
Test reports and quality certificate. Free 20×20 cm samples for lab tests and approval.
GeoSupplies Hub LLP, payment in KZT, VAT, full closing documents. We bid in mining and public tenders.
Geomembrane + geotextile + GCL + drainage + welding gear in one shipment.
Up to 20,000 m² of geomembrane per day — tailings and landfills delivered on time.
Logistics to Astana or straight to the mine, oilfield or construction site.
Prices depend on thickness, volume and standard — we'll send a quote for your project. Tap “Request price”.
GeomembranesTopThe core seepage barrier: HDPE resin with 2–3 % carbon black, UV stabilisers and antioxidants. Resists acids, alkalis, brines and hydrocarbons.
GeomembranesSingle- or double-sided texture for a high friction angle on steep slopes of tailings dams and landfills. Holds geotextile and drainage layers in place.
GeomembranesLinear low-density PE with up to 800 % elongation — copes better with differential settlement. For landfill capping, dams and ponds. Black, blue, green, white.
GeomembranesEthylene-vinyl acetate (5–8 % VA) — the most flexible in frost. Waterproofing of tunnels, metro, underground structures and dams; welds well.
GeomembranesMembrane thermally bonded to geotextile: 1 fabric + 1 film, 2 fabrics + 1 film, 1 fabric + 2 films. Puncture protection; suits concrete subgrades.
GeotextilesTopStaple or continuous filament. Cushion under and over geomembrane, separation and filtration of soils, drainage, road base reinforcement.
GeotextilesHigh strength and modulus: soft-soil stabilisation, fill platforms, haul and access roads, shoreline protection. Stable at pH 2–13.
GCLTopSodium bentonite needle-punched between two geotextiles. Swells into a dense gel barrier when wetted. Ideal secondary barrier under a geomembrane.
Geocells & geogridsHoneycomb of welded HDPE strips. Slope and embankment protection, road and platform bases, erosion control. Filled with soil, gravel or concrete.
Geocells & geogridsBase reinforcement for roads, yards and haul roads. Reduces rutting; aggregate thickness can be cut by up to 50 %.
Geocells & geogridsHigh one-direction strength with minimal creep: reinforced-soil retaining walls, steep slopes, bridge abutments, dams.
Geocells & geogridsAsphalt reinforcement: retards reflective cracking, rutting and thermal cracking in overlays and road widening.
DrainageBi- and tri-planar HDPE nets, also with heat-bonded geotextile. Leachate collection in landfills and tailings, slope drainage, leak detection layers.
DrainageStudded HDPE sheet with filter geotextile. Foundation wall drainage, green roofs, tunnels, landfills — replaces gravel filter layers.
Welding & otherAutomatic welder for geomembrane panels with a double seam and air channel for leak testing. Adjustable temperature and speed.
Welding & otherExtrusion welding of patches, pipe boots, details, corners and field repairs. Digital temperature control, overheat protection.
Welding & otherWear-resistant self-lubricating plastic: lining of dump truck bodies, bins, chutes — ore and coal don't stick. Also wear strips, guides and ground-protection mats.
Typical build-up for tailings, heap leach pads and landfills. Tap a layer to see what we supply.

1.5–2.0 mm HDPE, textured on slopes, GCL as secondary barrier, drainage geonet for solution collection.

Resistant to hydrocarbons and brines: tank bunding, drilling pits, evaporation ponds.

Base liner, leachate collection and LLDPE capping — protects groundwater and passes environmental review.

Storage, fire-water and irrigation ponds, canals, aquaculture: 0.5–1.0 mm, coloured membrane.

Dams, reservoirs, artificial and landscape lakes — composite membranes and GCL.

Haul and access roads, industrial yards, embankments on soft soils, asphalt overlays, slope protection.
Preliminary area including slopes, anchor trench and overlaps. We'll do the exact panel layout from your drawings.
Allowance: 1 m anchor trench around the perimeter + 10 % for overlaps and cutting. HDPE weighs ≈ 0.94 kg/m² per mm.
Send to a managerTypical practice. The final thickness is set by the design and environmental review.
Fish and decorative ponds, temporary covers, irrigation canals
Ponds, storage basins, landfill capping (LLDPE), canals
Landfills, drilling mud pits, tank farms, wastewater
Tailings, heap leach pads, hazardous waste
Minimum values of the standards the products are made to. Test reports are provided for every batch.
Thickness, mm
| Thickness | 0,75 | 1,0 | 1,5 | 2,0 | 2,5 | 3,0 |
|---|---|---|---|---|---|---|
| Density, g/cm³ | ≥ 0,940 | |||||
| Tensile strength at yield, N/mm | 11 | 15 | 22 | 29 | 37 | 44 |
| Tensile strength at break, N/mm | 20 | 27 | 40 | 53 | 67 | 80 |
| Elongation at yield / break, % | 12 / 700 | |||||
| Tear resistance, N | 93 | 125 | 187 | 249 | 311 | 374 |
| Puncture resistance, N | 240 | 320 | 480 | 640 | 800 | 960 |
| Stress crack resistance, h | ≥ 500 | |||||
| Carbon black content, % | 2,0–3,0 | |||||
| OIT (standard / HP), min | ≥ 100 / ≥ 400 | |||||
Thickness, mm
| Thickness | 0,75 | 1,0 | 1,25 | 1,5 | 2,0 | 2,5 | 3,0 |
|---|---|---|---|---|---|---|---|
| Density, g/cm³ | ≤ 0,939 | ||||||
| Break strength, N/mm | 20 | 27 | 33 | 40 | 53 | 66 | 80 |
| Elongation at break, % | 800 | ||||||
| 2 % secant modulus, N/mm | 370 | 420 | 520 | 630 | 840 | 1050 | 1260 |
| Tear resistance, N | 70 | 100 | 120 | 150 | 200 | 250 | 300 |
| Puncture resistance, N | 190 | 250 | 310 | 370 | 500 | 620 | 750 |
| Multiaxial strain at break, % | 30 | ||||||
| Stress crack resistance, h | 1500 | ||||||
| Carbon black, % | 2,0–3,0 | ||||||
Grade, kN/m
| Grade | 3 | 5 | 8 | 10 | 15 | 20 | 25 | 30 | 40 |
|---|---|---|---|---|---|---|---|---|---|
| Breaking strength (MD/CD), kN/m | 3 | 5 | 8 | 10 | 15 | 20 | 25 | 30 | 40 |
| Elongation at break, % | 20–100 | ||||||||
| CBR burst, kN ≥ | 0,6 | 1,0 | 1,4 | 1,8 | 2,5 | 3,2 | 4,0 | 5,5 | 7,0 |
| Tear strength, kN ≥ | 0,10 | 0,15 | 0,20 | 0,25 | 0,40 | 0,50 | 0,65 | 0,80 | 1,00 |
| Opening size O90, mm | 0,07–0,2 | ||||||||
| Permeability, cm/s | K·(10⁻¹…10⁻³) | ||||||||
| Strength retained (chemicals, UV), % | ≥ 80 | ||||||||
GCL type
| GCL type | GCL‑NP | GCL‑OF |
|---|---|---|
| Mass per area, g/m² | ≥ 4000 | ≥ 4000 |
| Swell index, ml/2 g | ≥ 24 | ≥ 24 |
| Tensile strength, N/100 mm | ≥ 600 | ≥ 700 |
| Peel strength, N/100 mm | ≥ 40 | ≥ 40 |
| Permeability, m/s | ≤ 5·10⁻¹¹ | ≤ 5·10⁻¹² |
| Hydrostatic resistance, no leakage | 0,4 МПа · 1 ч | 0,6 МПа · 1 ч |
| Fluid loss, ml | ≤ 18 | ≤ 18 |
Grade (TGSG biaxial, TGDG uniaxial)
| Grade | TGSG1515 | TGSG2020 | TGSG3030 | TGSG4040 | TGSG5050 | TGDG50 | TGDG80 | TGDG120 | TGDG160 | TGDG200 |
|---|---|---|---|---|---|---|---|---|---|---|
| Ultimate strength, kN/m ≥ | 15 | 20 | 30 | 40 | 50 | 50 | 80 | 120 | 160 | 200 |
| Strength at 2 %, kN/m ≥ | 5 | 7 | 10,5 | 14 | 17,5 | 12 | 26 | 36 | 45 | 68 |
| Strength at 5 %, kN/m ≥ | 7 | 14 | 21 | 28 | 35 | 28 | 48 | 72 | 90 | 145 |
Need other values? We manufacture to your project's specification.
Modern blown-film and calender lines, in-house lab with round-the-clock sampling, acceptance per GRI and ASTM.






Area, purpose or spec — via WhatsApp or phone.
We pick materials and price them with delivery.
Samples and documents for the designer if needed.
Contract with a Kazakh LLP, KZT, VAT.
Made for your project with QC and certificates.
To our Astana warehouse or straight to site.
As a guide: fish and decorative ponds 0.5–1.0 mm; landfills and drilling pits 1.5 mm; tailings and heap leach pads 1.5–2.0 mm or more. The design sets the final value — send us your spec.
HDPE to GRI‑GM13, LLDPE to GRI‑GM17, tested per ASTM methods. Project-specific values can be met on request.
HDPE is stronger and more puncture/chemical resistant — for tailings, landfill and pit bases. LLDPE is more flexible (up to 800 % elongation) and tolerates settlement — for landfill caps and dams.
Per the manufacturer: up to 50 years when covered, over 10 years exposed to sunlight thanks to 2–3 % carbon black and UV stabilisers.
Made to order; plant capacity is up to 20,000 m² per day. The exact lead time with delivery to your site is stated in the quotation.
Yes. The supplier is GeoSupplies Hub LLP (Kazakhstan): contract and payment in KZT, VAT, full documents. We bid in mining and public tenders.
Yes — 20×20 cm samples for lab testing and designer approval.
We supply hot-wedge welders and extrusion guns and advise on installation and seam testing. On-site installation is discussed separately.
Fill in the form — it opens WhatsApp with a ready message. Or just call us.